2002 DEMAG Ergotech 1000/1400 - 11500
No longer available
Specifications
| Manufacturer | DEMAG |
| Model | Ergotech 1000/1400 - 11500 |
| Year | 2002 |
| Condition | Used |
| Stock Number | 00062 |
| Clamping force | 1000 tons |
| Opening stroke | 1250 mm |
| Min. mold height | 500 mm |
| Max. mold height | 1200 mm |
| Distance between tie rods | 1400 × 1120 mm |
| Plate size | 1950 × 1670 mm |
| Screw diameter | 80–110 mm |
| Injection volume | ± 2000–3800 cm³ |
| Shot weight (PS) | ± 1800–3400 g |
| Injection pressure | up to ≈2380 bar |
| Total weight | 72.5 tons (72,500 kg) |
| Total length | 13,184 mm |
| Total width | 3,175 mm |
| Total height | 2,925 mm |
| Max. pressure ($P_{max}$) | 190 bar |
| Max. flow rate ($Q_{max}$) | 486 l/min |
| System current | 409 A |
| Heating current | 154 A |
Description
Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours.
Can be inspected under power upon appointment.
Availability: 06/2026
Please Note:
The information was obtained to the best of our abilities and - where possible - from the manufacturers.
It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms.
Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken.
We advise you to check any vital details!
