2000 SAF Plasmatome 20HP
Especificaciones
| Fabricante | SAF |
| Modelo | Plasmatome 20HP |
| Año | 2000 |
| Condición | Usado |
| Número de Stock | 00059 |
| Working dimensions | 1500 x 3000 mm |
| Plasma source | Nertajet HP120 |
| Cnc control | DIGISAF 100 |
| Cooling unit | HYFRA |
| Steel | max. 20 mm at approx. 900 mm/min / 1 mm at approx. 6,500 mm/min |
| Stainless steel | max. 15 mm at approx. 700 mm/min / 1 mm at approx. 5,500 mm/min |
| Aluminium | max. 20 mm at approx. 800 mm/min / 1 mm at approx. 5,000 mm/min |
Descripción
This SAF plasma cutting machine was built in 2000 and is still in good condition, with relatively low operating hours (17900h). It has only been used for own production.
The machine is equipped with a dust extraction system, allows for both wet and dry cutting, and also includes numerous spare and wear parts.
All documents are available.
A site visit is possible at any time by prior arrangement.
Availability: 03/2026
Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
